|
 |
|
|---|---|---|
Eppendorf Vacufuge |
 |
|
|
Contact: Sonja Young Rm: NSC 518 Tel: (404) 413-5379 General Warnings: Every time you use the Vacufuge, you MUST sign the logbook. Balance your tubes. Clean up any spills in the chamber. |
| 1. Turn on power in the back. 2. Load samples into rack. Balance tubes. 3. To heat while evaporating a. Press set temp. button b. Keep pressing button until you get to the temp. you want. The last selection is no temp. ( no temp lit up) c. The light will keep flashing until the chamber reaches the temp. selected d. The Temp. can be changed during a run 4. Press start 5. The rotation control lamp turns green. As soon as the lid has locked automatically the Lid control lamp (green) goes out. At 1000 rpm, the vacuum pump is switched on. The vacuum lamp lights up and the ventilation valve closes. The ventilation lamp flashes. 6. Press stop. The vacuum light goes out, when the rotor stops, the rotation lamp goes out. The lid lamp lights up when the lid can be opened. This information is given as a guide to the facilities and instrumentation available in the DNA/Protein Core facility at Georgia State University. If you have any concerns or thoughts about the content of this website please contact: John Houghton (404) 413-5390
|
